1.Specifications and parameters of titanium flanges and their testing methods
Titanium flange is made of non-ferrous metal titanium or titanium alloy to make the pipe and pipe connected to each other, connected to the pipe end.
There are holes in the titanium flanges and the two flanges are connected by bolts.The flanges are sealed with gaskets.Flanged pipe fitting refers to a pipe fitting with a flange (protruding edge or joint plate).
It may consist of threaded joint or welded.Flange connection is composed of a pair of flanges, a gasket and a number of bolts and nuts.The gasket is placed between the sealing surfaces of the two flanges. After tightening the nuts, the specific pressure on the surface of the gasket will be deformed when it reaches a certain value, and the uneven places on the sealing surface will be filled to ensure the connection is tight and leakless.
According to the structure type, there are integral titanium flange, butt-welded titanium flange, looper titanium flange and threaded titanium flange.
2. Product Specifications
Surface: forged surface, rolled surface, lathe surface, polished surface
Specifications: produce all kinds of specifications according to the flange standard, also can produce the specified non-standard flanges according to the drawings provided by customers.
3. Delivery Status: Machined smooth surface
4, production mode: free forging, die forging, precision forging, welding
5,Detection method: according to customer needs to do ray detection, coloring, flaw detection, hydraulic test and other tests.
Titanium alloy flange
7. Performance standards
8. Standard value
Brand Al V n.max c.max h.max fe. Max o.max allowance (single)/ Max allowance (total) Max
TA1 --- --- 0.03 0.08 0.015 0.20 0.18 0.1 / 0.40
TA2 --- --- 0.03 0.08 0.015 0.30 0.25 0.1/ 0.40
TC4 5.5-6.7 5 3.5-4.5 0.05 0.08 0.015 0.40 0.20 0.1 /0.40
Reference standard for mechanical properties/Mechanical properties at room temperature,
Tensile strength (Min)Yield strength(Min) Elongation (Min) Reduction of section(Min)
TA1/GR1 240 MPa 170MPa 25% 30%
TA2 /Gr2 345 MPa 275MPa 20% 30%
TC4 /Gr5 895MPa 825MPa 10% 20%