Product introduction
Grade 7 titanium bar, also named ti-0.2pd titanium bar, pd content is 0.12 -- 0.25%, because it contains the precious metal palladium, is currently the most expensive titanium alloy rod in titanium alloy, market spot is less, generally produce according to customer requirements
We supply Grade 7 titanium bar specifications as follows:
Diameter:6-200 mm
The length：≤6000 mm
Special requirements can be customized or zero cut if it in stock.
Brand name: WIT
Standard: ASTM B265
Test report :MA SGS, etc
Feature:
1.Grade 7 titanium bar (ti-0.2pd titanium bar) has good ductility, can be bent, small hardness, good welding molding, easy to process.
2. The content of pd is about 0.12-0.25%, which is the most corrosion-resistant titanium plate among all titanium plates
3. Physical and mechanical properties are similar to Grade 1 titanium bar , with low strength
4. Non-toxic, non-magnetic, no radiation
Mechanical Properties
Grade | Tensile strength, MPa (min) | Yield strength, MPa (min) | Elongation, %(min) | Reduction of Area, %(min) |
Gr7 | 345 | 275-450 | 20 | 25 |
Chemical Component
Grade | Ti | Pd | N, max | C, max | H, max | Fe, max | O, max | Residuals | |
| Max each | Max total | ||||||||
Gr7 | Main | 0.12-0.25 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | 0.1 | 0.4 |
Application:
1.Chemical industry
2.Electric power
3.Used for aircraft engine compressor components,Navigation
4.Other corrosive environment equipment or accessories
5.Industrial application, used for making electrode electrolysis industry, power plant condenser, oil refining and seawater desalination heater and environmental pollution control devices.
Product picture
