Product introduction
Grade 9 titanium bar, also named Ti-3AL-2.5V titanium bar, the content of titanium is about 94%, and there are few spot products on the market. It is usually customized according to customer requirements.
We can supply Grade 9 titanium bar specifications as follows:
Diameter:6-300 mm
The length ≤6000 mm
Special requirements can be customized or cut
Brand name: WIT
Standard: ASTM B348 AMS4928, etc
Test report MA SGS, etc
Feature:
1. The hardness of Grade 9 titanium bar (ti-3al-2.5v titanium bar) is relatively higher than CP titanium, and the processing difficulty is between pure titanium and GR5.
2. Good corrosion resistance
3. Physical properties: moderate strength, moderate hardness, is wear resistance than pure titanium
4, Non-toxic, no magnetic, no radiation.
Chemical Component
Grade | Ti | AL | V | N, max | C, max | H, max | Fe, max | O, max | Residuals | |
| Max each | Max total | |||||||||
Gr9 | Main | 2.5-3.5 | 2.0-3.0 | 0.03 | 0.08 | 0.015 | 0.25 | 0.15 | 0.1 | 0.4 |
Mechanical Properties
Grade | Tensile strength, MPa (min) | Yield strength, MPa (min) | Elongation, %(min) | Reduction of Area, %(min) |
Gr9 | 620 | 483 | 15 | - |
Application:
1.Chemical industry
2.Electric power
3.Sports equipment
4.Other environmental fields with relatively high performance requirements for equipment or accessories
